Automatic Thermal Laminating Machine is one of the equipment favored by large packaging companies. It is widely praised by customers for its high production efficiency and small number of operators. Let's take a look at the eight main features of the Automatic Thermal Laminating Machine that are favored by large packaging companies:
1. The Automatic Thermal Laminating Machine adopts a stepless speed change device to adapt to different paper feeding. The precise wind head can easily adjust the relative position of the wind head and the paper pile during operation. The unique non-stop paper feeder ensures continuous production.
2. The hard chrome composite roller of the main engine has built-in electric heating system and automatic temperature control device to make the temperature distribution even. The large diameter composite drum design ensures the stable operation of the OPP film and will not shift left and right. The hand-pressed hydraulic cylinder controls the compound pressure, so that the upper and lower drums can be balanced and stressed. High-precision hard chrome-plated mirror heating rollers and high-performance laminating rubber rollers perfectly realize the thermal lamination process.
3. The air pressure assists the deviation correction system to keep the film edge in a straight line, stable and accurate.
4. The coating oil head is controlled by a stepless speed governor, which can more effectively maintain the stability of the coating amount. The high-precision coating and metering hard chrome rollers ensure the uniform coating amount and achieve the precise coating effect. At the same time, it is equipped with two sets of oil pumps and stainless steel oil tanks, which are suitable for the use of water-based and oil-based glues. Adopt DC motor lamination coating device, which is stable, fast and easy to operate.
5. The film unwinding shaft adopts magnetic powder braking to maintain stable tension. The unique pneumatic film tensioning device ensures the tightness of the film when laminating and lifting the film, which effectively prevents the failure of the film roll.
Sixth, automatic slitting function, the slitting length can be freely set according to the size of the paper, the unit linkage operation system, with the speed of the host, automatically increase or decrease, the operation is simple, the labor cost is saved, and the labor intensity of the operator is reduced. The cutting machine is a disc-type rotary blade cutter, with 4 sets of blades in the rotary knife seat, which can be fine-tuned and controlled, and is easy to operate; when adjusting, it cooperates with the pressure roller to interact, and the speed can be freely controlled according to the size of the paper.
7. The drying system adopts a special horizontal drying box design and an automatic constant temperature control system (the heating speed is fast, which effectively saves the working auxiliary time from 30° to 90° in only about 15 minutes). This design can make the OPP film stable. Travel dry without causing film offset or shrinkage. The drying system suitable for water-based glue has high heat and wide distribution, which completely distributes the heat energy evenly on the OPP film, and promotes the rapid drying of the glue and the fast reaction speed.
8. The advanced circuit adopts PLC control, and the motor adopts frequency conversion control, which is stable, energy-saving, safe and reliable.
It is precisely because of the above factors that the Automatic Thermal Laminating Machine has become an essential machine for powerful packaging companies. Because we believe that such machines can be guaranteed in terms of quantity and quality, and can meet the needs of customers to the greatest extent.
An automatic thermal laminating machine is a device that uses heat and pressure to bond two or more sheets of material together. The machine consists of a heated platform, a roller system, and a pressure plate. The platform heats the material to be laminated, the roller system applies pressure to the material, and the pressure plate holds the material in place while it is being laminated.
An automatic thermal laminating machine is a device that is used to join two materials together using heat and pressure. The machine heats up a layer of adhesive between two pieces of material, which bond the two pieces together when pressure is applied. This type of machine is commonly used in the manufacture of products such as laminated floors, countertops, and wall coverings.
Are you interested in NFY-B1080 Automatic Thermal Laminating Machine, click the link to take a look.
JIALITE is one of the top Water Base Oil Coating Machine Manufacturers, Factory and Suppliers that focuses on Automatic pre-coating laminating machine. We have our own production workshop and design team. If you cooperate with us, we can provide you with first-hand prices.
Welcome to choose JIALITE - one of the top Water Base Oil Coating Machine Manufacturers, Factory and Suppliers that focuses on Automatic pre-coating laminating machine.
09 Mar, 2022
In the modern world, there are countless machines that help to make our lives easier. There are machines for farming, manufacturing, and even cleaning.
28 Feb, 2022
The Laminating Machine has very high requirements for accuracy, especially the surface accuracy of each roller and the degree of shopping. Once the slightest streaks, cracks, scratches, covered spots, or slight roundabout deformations appear.
28 Feb, 2022
The Automatic Laminating Machine is a special equipment for compounding printed matter with pre-coated plastic. Compared with the instant coating type laminating machine, its biggest feature is that there is no glue coating and drying part, so this type of laminating machine has compact structure, small size, low cost, simple operation and good product quality stability.
24 Feb, 2022
Judging from the development of coating technology for coating machines in recent years, the future of coating technology will have three important characteristics:
THE LEADER OF PACKAGING MACHINERYCONTACT US